ANIMO 7020C NB-IoT Dev Board/Shield

Out of stock

SIMCON SIM7020 based NB-Iot development board / Arduino Compatible shield

Compare

What is NB-Iot ???

NB-Iot (Narrow Band-Internet of Things) is LPWA (low power wide area) technology which is developed for enabling a wide range of new IoT devices and services. A significant improvement of the power consumption on user devices , system capacity and spectrum efficiency are to be catered by NB-Iot. It is proven that a battery life of more than 10 years can be supported for a wide range of use cases. With the improvements of new physical layer signals and layers, the demanding requirement of extended coverage in rural and deep indoors can be met while keeping the devices complexity ultra low.

SIM7020C

The SIM7020C is a Nb-IoT module with multiple bands supported and also its in SMT type. Witha set of rich interfaces including UART,GPIO etc. , SIM7020 has a strong extension capability nad much flexibility and ease of integration for customers applications. In addition SIM7020 is compatible with SIM800C which is having the capability of minimizing the investments of customers and minimizing the development time.

ANIMO 7020C

ANIMO 7020C is a development board cum a shield based on SIMCON SIM7020C. With a wide range of features and the Arduino friendly form factor plues design , ANIMO 7020C will be the ultimate solution for anyone who is interested in NB-IoT to develop their applications.

ANIMO 7020 Top view

ANIMO 7020C Bottom View

ANIMO 7020C FEATURES

  • PCB Dimension : 54mm x 69mm
  • NB-IoT Module : SIMCOM SIM7020C
  • Bands :  B1/B3/B5/B8
  • Sim Card : Mirco Sim Support
  • Power Supply
    • USB
    • LIPO Battery 3.7V
    • External 5V
    • Dry cell
  • Indication LEDs (4)
    • STS – SIM7020 Status Indicator
    • NET – SIM7020 Network Indicator
    • CHG – Charging Indicator
    • ST – Battery Indicator
  • Shield support : Arduino Uno or equivalent
  • Switches (2)
    • Power
    • Reset
  • External pins to be accessed via pin headers
  • Antenna connectors (2)
    • SMA right angle
    • UFL Connector
  • Micro jumper selections (2)
    • Power Selection
      • LiPo – Power Via Lipo Battery (max 4.2V)
      • EXT_5V – power via External 5V
      • USB – Power via USB
    • UART Selection
      • Arduino Software Serial
      • Arduino hardware Serial
  • Solder Jumper Selections (4)
    • Module Power Selection
      • Dry Cell
      • External (Default)
    • Charging Source Selection
      • USB
      • External (Default)
    • Shield Pins
      • Open (Default)
      • Close
    • STS LED
      • On (Default)
      • Off
    • NET LED Enable
      • On (Default)
      • Off
PACKAGE INCLUDES
  • ANIMO 7020C
  • Antenna
  • Pin headers
  • Micro jumpers

See It Styled On Instagram

    No access token

Main Menu

ANIMO 7020C NB-IoT Dev Board/Shield